Site icon Good BB

7900 Tips To Maintain Electrical Equipment At Home

Cyberspace, Data, Wire, Electronic, Electric, Ethernet

On some occasions, power surges or a damaged cable can put all electrical equipment in a home at risk. There are methods and new devices that can be installed by expert electricians that protect every element of the home and even offices or shops.

We offer you some tips and recommendations to guarantee the safety of the electrical installations of your home, company or community of neighbors. Here some of the most efficient alternatives that can be used to improve both electrical safeties and to prevent losses in electrical equipment and devices will be presented.

Take advantage of the reform to improve the wiring system

When you want to remodel a house or business, you can have specialists in the field. The work of these professionals is essential when reforming a home since they will be the ones who distribute the wiring throughout all the rooms. First, the panels are checked to ensure they can withstand the new electric charge.

As the rooms begin to change, the wiring is distributed from the main outlet through the walls. With the new materials by which the cables are manufactured, the quality and resistance of the general electrical installation are improved. Some cables are designed with fire, water or moisture-resistant materials. To grant a greater degree of security to the home or office, the implementation of new wiring must be studied during the renovations. In case of an emergency, don’t wait and call an emergency electrician in Sydney.

Necessary maintenance

The installation, maintenance and repair of residential, commercial and industrial electrical services is the work of the most prepared electricians. In some cases, a business may need to expand its electrical system, for example, with the division of new offices or warehouse spaces. In this case, it is convenient that this type of work is carried out by professionals.

Old electrical installations are often poor, and in some cases dangerous. In buildings that do not have modern facilities, electricians disassemble the old installation to proceed to install a new one with all the necessary devices and regulators so that its operation is efficient and safe. It is necessary that once you’re done with the installation, you carry out rigorous maintenance in order to locate possible damage or reinforce wiring areas exposed to the weather.

Solar installations

One of the most revolutionary elements in the field of electricity is the use of solar panels that provide clean energy to homes. The electrical installation with solar panels has been booming for years, and there are many urbanizations and environmentally conscious companies that have joined sustainable energy. Even though it is a technology of recent implementation, the truth is that it is very difficult to find buildings that are disconnected from the electricity grid.

In fact, sometimes it is possible that both energy sources can be combined. Sometimes there are some problems and technical failures that can cause blackouts for days.

Wiring to improve network connections

It is possible to improve the network connection of any home. You can find an optimal way to keep the computer and digital devices connected to the network through a network cabling installation. Through the configuration, study and arrangement of the wiring, direct connections can be obtained via LAN cable and RJ45 outputs in any room of the home.

Handle appliances with caution:

Check that the voltage of your appliances is adequate for your home and that you have enough contracted electrical power.

If you need to handle them, disconnect them before pulling the insulating plug that connects them to the wall: never pull the cable directly.

Use the grounding of your appliances if they have it and your installation allows it. Also, if you replace a grounded plug, replace it with a grounded one too.

Locate appliances, especially stoves, televisions and sound equipment at a safe distance from the wall to prevent overheating. If smoke or unusual smell appears, disconnect them immediately and have them checked by a technician.

Protect babies and young children from electricity:

Make sure your children do not use electric toys that are plugged into the network unless you keep an eye on them while they play.

Keep children out of reach of loose plugs or cables, especially in their playroom, and cover them with electrical tape or plug masks whenever possible.

Make sure children do not play near the TV or lying in front of it. It is a very heavy object if it falls on a child, and also in older models, the cathode tube could explode if it receives a strong blow while it is on.

Let the iron cool in a secluded place and out of the reach of children.

Outside the home, be careful with electrical infrastructure:

Towers, power poles and transformation booths can be dangerous: do not enter or climb them, do not throw stones or other objects at them, and do not use them as supports.

In areas under a power line, do not play with objects that can touch it (sticks, kites, drones, balls, etc.)

If a lamppost junction box is open, do not touch it under any circumstances.

If you find a cable on the ground, do not touch it, let the electric company know.

6. Keep your electrical installation safely:

Check that the main switch and the control and protection panel are in an easy access point known to all family members.

Once a month, at least, check that the differential works correctly. Press the test button (usually yellow, gray or black), and if the differential is triggered, everything works. If not, call an authorized electrician installer to check.

In case of an electrical accident:

If you can, cut off the power supply from the current. If not, take the victim by the clothes and pull it without coming into contact with the skin. If necessary, cover the bare parts with dry clothing before touching. Here are some more electrical safety tips at home.

Conclusion

These tips will help you maintain your electrical equipment at home. In case of electric fire, use a fire extinguisher to put out the fire.

If a localized burn occurs, before treating it, wash your hands carefully. Cool the burn with water or ice, clean around it with a wet compress and spread an antiseptic solution. Finally, cover it with a sterile compress and cotton. Do not touch the burn directly or open the blisters or bladders that form on it. If the burn is severe, do not put creams and go to your medical center.

Exit mobile version